DRY BAZAAR – PAINT PROTECTION FILM (PPF)
TERMS & CONDITIONS
(BLINK SHINE PRODUCT WARRANTY + INSTALLATION + MAINTENANCE POLICY)

This document consƟtutes a legally binding agreement between the Customer, Dry Bazaar (Authorized
Service Provider), and Blink Shine (Product Manufacturer). By accepƟng the invoice and taking delivery of
the vehicle, the customer acknowledges that they have read, understood, and agreed to all terms, condiƟons,
exclusions, and obligaƟons stated herein.
1. BRAND ROLES & RESPONSIBILITY STRUCTURE
1.1 Blink Shine (Product Manufacturer):
Blink Shine is the manufacturer of the Paint ProtecƟon Film (PPF) applied on the vehicle. The brand is
responsible solely for the material quality, chemical composiƟon, and performance of the film under
normal usage condiƟons as defined in this agreement.
1.2 Dry Bazaar (Service Provider):
Dry Bazaar acts as an authorized installaƟon partner and is responsible for the applicaƟon of the film using
industry-standard techniques. Dry Bazaar’s responsibility is limited to installaƟon workmanship and service
quality at the Ɵme of delivery.
1.3 SeparaƟon of Liability:
The customer clearly understands that manufacturing defects fall under Blink Shine’s responsibility, while
installaƟon-related issues fall under Dry Bazaar. Any damage arising from external factors, misuse, or
negligence shall remain the sole responsibility of the customer.
2. WARRANTY COVERAGE – BLINK SHINE
2.1 Yellowing Resistance:
The PPF is designed with advanced UV-resistant technology to minimize discoloraƟon over Ɵme. Any
abnormal or uneven yellowing due to inherent material defect will be considered under warranty; however,
gradual tone change due to environmental exposure is considered normal.
2.2 Cracking / Peeling / Crazing:
The film is engineered to maintain structural integrity without cracking, peeling, or surface crazing. If such
issues occur due to manufacturing defects under proper usage, they will be covered; however, damage
caused by impact or improper handling is excluded.
2.3 Bubbling / Blistering:
The film should remain free from persistent bubbles once the curing process is completed. Minor bubbles
or moisture during the iniƟal installaƟon phase are normal and expected to seƩle within 7–15 days and are
not considered defects.
2.4 Staining Resistance:
The PPF provides resistance against common contaminants when maintained properly. Permanent stains
caused by internal chemical failure will be covered, whereas stains due to delayed cleaning or
environmental neglect will not be covered.
2.5 Adhesion Failure:
The adhesive layer of the PPF is designed for strong bonding with OEM painted surfaces. Any delaminaƟon
or liŌing due to adhesive failure will be covered, provided the surface condiƟon and maintenance
guidelines have been properly followed.
3. WARRANTY EXCLUSIONS
3.1 Accidental or Physical Damage:
Any damage caused by external impact such as stone chips, scratches, accidents, or vandalism is not
covered. These are considered unavoidable road risks and fall outside the scope of manufacturing warranty.
3.2 Improper Washing & Handling:
Damage caused due to the use of hard brushes, abrasive cloths, automaƟc car washes, or harsh chemicals
is excluded. Improper maintenance pracƟces directly affect film performance and void warranty eligibility.
3.3 Non-OEM or Repainted Surfaces:
ApplicaƟon of PPF on repainted or repaired panels may lead to adhesion issues due to inconsistent paint
quality. Such cases are excluded as the performance of the film depends heavily on the condiƟon of the
underlying paint.
3.4 ApplicaƟon on Non-Painted Surfaces:
PPF applied on trims, plasƟcs, chrome, carbon fiber, or glass surfaces is not covered under warranty. These
surfaces behave differently and are not designed for standard film adhesion.
3.5 Environmental and Chemical Exposure:
Exposure to acid rain, industrial fallout, cement dust, fuel spills, or harsh chemicals can damage the film.
Such condiƟons are beyond manufacturer control and therefore excluded from warranty coverage.
3.6 Negligence or Misuse:
Failure to follow maintenance instrucƟons, delayed cleaning of contaminants, or improper vehicle care will
void the warranty. The customer is responsible for ensuring proper upkeep of the film.
4. INSTALLATION TERMS – DRY BAZAAR
4.1 Nature of InstallaƟon Process:
PPF installaƟon is a manual, skill-based process and may involve slight variaƟons. While utmost care is
taken, achieving a completely dust-free or flawless finish is not always possible due to environmental
limitaƟons.
4.2 Acceptable InstallaƟon VariaƟons:
Minor dust parƟcles, micro bubbles, edge lines, or stretch marks are considered industry-acceptable
standards. These do not impact performance and shall not be treated as defects.
4.3 Panel Complexity & Edges:
Certain vehicle designs require stretching, trimming, or relief cuts for proper applicaƟon. Slight visibility on
edges or corners is normal and unavoidable depending on panel geometry.
4.4 InspecƟon Responsibility:
The customer must inspect the vehicle thoroughly at the Ɵme of delivery. Any installaƟon-related concerns
must be reported within 24 hours, aŌer which the work shall be deemed accepted.
5. PAINT CONDITION DISCLAIMER
5.1 Pre-ExisƟng Paint CondiƟon:
Dry Bazaar does not guarantee the condiƟon, strength, or quality of the vehicle’s paint. Any exisƟng defects
such as weak paint, scratches, or prior repairs are the responsibility of the customer.
5.2 Repainted Panel Risk:
Panels that have been repainted or repaired may have weaker adhesion properƟes. The customer
acknowledges this risk and accepts that failure in such areas is not covered under warranty.
5.3 Paint Peeling Risk:
During removal or over Ɵme, paint peeling may occur, especially on repainted surfaces. Dry Bazaar and
Blink Shine shall not be liable for such incidents.
6. MANDATORY MAINTENANCE POLICY
6.1 Quarterly Detailing Requirement:
The customer must mandatorily undergo exterior detailing service every 3 months from Dry Bazaar or an
authorized center. This is a compulsory requirement to maintain warranty validity.
6.2 Technical JusƟficaƟon:
Over Ɵme, environmental contaminants such as iron parƟcles, dust, and pollutants embed into the film
surface. Regular detailing ensures removal of these contaminants, maintaining clarity, adhesion strength,
and protecƟve properƟes.
6.3 Warranty Impact:
Failure to perform scheduled detailing will lead to degradaƟon of the film and shall result in automaƟc
voiding of warranty. The customer must maintain proper service records as proof during claims.
7. CUSTOMER RESPONSIBILITIES
7.1 Post-InstallaƟon Care:
The customer must avoid washing the vehicle for 5–7 days aŌer installaƟon. This allows proper curing and
bonding of the film to the surface.
7.2 Washing Guidelines:
Only pH-neutral shampoos and microfiber cloths should be used. High-pressure water should not be
directed at edges, especially within the first 2 weeks.
7.3 Contaminant Removal:
Bird droppings, tree sap, and similar contaminants must be removed immediately. Delay in cleaning may
cause staining and is not covered under warranty.
8. WARRANTY CLAIM PROCESS
8.1 Required Documents:
To iniƟate a claim, the customer must present the original invoice, Blink Shine warranty serial number, and
maintenance records. Incomplete documentaƟon may lead to rejecƟon.
8.2 InspecƟon Procedure:
The vehicle must be presented for inspecƟon to determine the root cause of the issue. Approval of claims
will be based solely on technical evaluaƟon.
8.3 ResoluƟon:
If approved, only the affected area will be repaired or replaced. Full vehicle replacement or monetary
compensaƟon shall not be provided.
9. LIMITATION OF LIABILITY
9.1 Scope of Liability:
The liability of Dry Bazaar and Blink Shine is strictly limited to repair or replacement of defecƟve film. No
addiƟonal claims shall be entertained.
9.2 Exclusion of Damages:
Neither party shall be liable for indirect, incidental, or consequenƟal damages including loss of vehicle use
or business loss.
10. VOID CONDITIONS
10.1 Warranty Void Scenarios:
The warranty shall become void if maintenance guidelines are not followed, detailing is skipped, or the film
is tampered with in any manner.
10.2 Unauthorized IntervenƟon:
Any work carried out by unauthorized service providers will immediately void the warranty. Only Dry
Bazaar or approved partners are allowed.
11. TRANSFERABILITY
This warranty is strictly non-transferable and is valid only for the original customer and the vehicle on
which the film was applied. Any change in ownership shall terminate warranty coverage.
12. DISPUTE RESOLUTION
In case of any dispute, both parƟes agree to first aƩempt resoluƟon through mutual discussion. If
unresolved, the maƩer shall be referred to arbitraƟon as per applicable Indian laws.
13. GOVERNING LAW
This agreement shall be governed by the laws of India, and jurisdicƟon shall lie with the courts of the
operaƟng locaƟon of Dry Bazaar.
14. CUSTOMER DECLARATION
I hereby confirm that I have read and understood all terms and condiƟons, including maintenance
requirements and warranty limitaƟons. I agree to comply fully with the condiƟons menƟoned herein.
DRY BAZAAR – CERAMIC COATING
DETAILED TERMS & CONDITIONS
(BLINK SHINE CERAMIC COATING WARRANTY + APPLICATION + MAINTENANCE POLICY)
This document consƟtutes a legally binding agreement between the Customer, Dry Bazaar (Authorized
Service Provider), and Blink Shine (Product Manufacturer). By accepƟng the invoice and taking delivery of
the vehicle, the customer confirms that they have read, understood, and agreed to all terms, condiƟons,
exclusions, and obligaƟons menƟoned herein.
1. BRAND ROLES & RESPONSIBILITY STRUCTURE
1.1 Blink Shine (Product Manufacturer):
Blink Shine is the manufacturer of the ceramic coaƟng product applied on the vehicle. The brand is
responsible solely for the formulaƟon, chemical performance, and durability of the coaƟng under normal
usage condiƟons.
1.2 Dry Bazaar (Service Provider):
Dry Bazaar is responsible for proper surface preparaƟon, applicaƟon, and curing of the ceramic coaƟng. The
quality of installaƟon depends on process execuƟon and is limited to workmanship at the Ɵme of delivery.
1.3 SeparaƟon of Liability:
Manufacturing defects fall under Blink Shine, while applicaƟon-related issues fall under Dry Bazaar. Any
external damage, misuse, or environmental impact shall remain the sole responsibility of the customer.
2. WARRANTY COVERAGE – BLINK SHINE CERAMIC COATING
The warranty applies only under normal usage condiƟons and subject to strict adherence to maintenance
guidelines.
2.1 OxidaƟon & Paint ProtecƟon
The ceramic coaƟng provides a protecƟve layer that minimizes oxidaƟon and paint chalking caused by
environmental exposure. Any abnormal degradaƟon of coaƟng leading to premature oxidaƟon under
proper maintenance shall be considered under warranty.
2.2 UV ProtecƟon & Color Fading
The coaƟng is engineered to resist UV damage and reduce paint fading over Ɵme. Significant fading due to
coaƟng failure within the warranty period will be covered; however, gradual aging of paint is natural and
not covered.
2.3 Acid Rain & Environmental Contaminants
The coaƟng provides resistance against acid rain and airborne contaminants. If the coaƟng fails to protect
the surface under normal exposure condiƟons, it may be considered a valid claim subject to inspecƟon.
2.4 Bird Droppings & Tree Sap ProtecƟon
The coaƟng offers resistance against etching caused by bird droppings and tree sap. However, such
contaminants must be removed promptly; permanent damage due to delayed cleaning will not be covered.
2.5 Hydrophobic Performance
The coaƟng is designed to maintain water-repellent (hydrophobic) properƟes during the warranty period.
NoƟceable loss of hydrophobic behavior due to coaƟng failure may be covered if proper maintenance is
followed.
2.6 Gloss RetenƟon
The ceramic coaƟng enhances and maintains paint gloss. Significant reducƟon in gloss levels below
manufacturer standards due to coaƟng failure may be considered under warranty.
3. WARRANTY EXCLUSIONS
3.1 Physical Damage Exclusions
Scratches, swirl marks, stone chips, dents, or any surface damage caused by physical contact are not
covered. Ceramic coaƟng is not a scratch-proof or impact-resistant soluƟon.
3.2 Improper Washing & Handling
Damage caused by improper washing methods such as hard cloths, brushes, or automaƟc car washes is
excluded. The coaƟng requires proper care to maintain its performance.
3.3 Industrial & Surface ContaminaƟon
Surface rust, rail dust, iron deposits, and industrial fallout are not covered. These contaminants require
periodic decontaminaƟon and are part of regular maintenance.
3.4 Water Spoƫng
Hard water stains and mineral deposits caused by improper drying or neglect are not covered. These issues
arise due to environmental factors and improper care.
3.5 Maintenance Negligence
Failure to follow recommended maintenance schedules, including periodic detailing or inspecƟons, will
void the warranty. Proper upkeep is essenƟal for coaƟng performance.
3.6 Unauthorized Products & Methods
Use of non-recommended chemicals, polishing compounds, or applying wax over ceramic coaƟng may
degrade performance and void warranty.
3.7 Environmental & Natural Events
Floods, hailstorms, extreme weather, and natural disasters are excluded. Such events are beyond the
control of the manufacturer and service provider.
3.8 Pre-ExisƟng Paint Defects
Any underlying paint issues, manufacturer defects, or undisclosed damage prior to coaƟng applicaƟon are
not covered.
4. APPLICATION TERMS – DRY BAZAAR
4.1 Surface PreparaƟon:
Proper surface preparaƟon including washing, decontaminaƟon, and polishing is carried out before coaƟng
applicaƟon. However, complete defect removal depends on paint condiƟon and customer approval.
4.2 Nature of ApplicaƟon:
Ceramic coaƟng is applied manually and may result in minor high spots, streaks, or uneven reflecƟons if not
visible at delivery stage. These must be reported within 24 hours.
4.3 Curing Period:
The coaƟng requires proper curing Ɵme. During this period, exposure to water, dust, or contaminants may
affect performance and is the responsibility of the customer.
5. PAINT CONDITION DISCLAIMER
5.1 Pre-ExisƟng CondiƟons:
Dry Bazaar does not guarantee paint condiƟon prior to applicaƟon. Any scratches, swirl marks, or defects
present before coaƟng remain the responsibility of the customer.
5.2 Paint CorrecƟon LimitaƟon:
Polishing improves appearance but does not ensure permanent defect removal. Deep scratches or paint
damage may remain visible even aŌer coaƟng.
6. MANDATORY MAINTENANCE POLICY
6.1 Quarterly Detailing Requirement
The customer must undergo exterior detailing service every 3 months from Dry Bazaar or an authorized
partner. This is mandatory to maintain coaƟng performance and warranty validity.
6.2 Technical JusƟficaƟon
Over Ɵme, contaminants such as iron parƟcles, dirt, and mineral deposits accumulate on the coaƟng
surface. These reduce hydrophobic properƟes and gloss, leading to premature coaƟng failure if not
removed.
6.3 Warranty Impact
Failure to perform periodic detailing will result in coaƟng degradaƟon and automaƟc voiding of warranty.
Customers must maintain service records for verificaƟon during claims.
7. CUSTOMER RESPONSIBILITIES
7.1 Post-ApplicaƟon Care:
Avoid washing the vehicle for 5–7 days aŌer coaƟng applicaƟon. This ensures proper bonding and curing of
the coaƟng layer.
7.2 Washing Guidelines:
Use only pH-neutral shampoos and microfiber cloths. Avoid automaƟc car washes and harsh chemicals that
can damage the coaƟng.
7.3 Immediate Cleaning:
Contaminants such as bird droppings and tree sap must be cleaned immediately. Delayed cleaning can
cause permanent etching.
8. WARRANTY CLAIM PROCESS
8.1 DocumentaƟon Requirement:
Customer must present invoice, Blink Shine warranty serial number, and maintenance records. Claims
without documentaƟon may be rejected.
8.2 InspecƟon Process:
The vehicle will be inspected to determine whether the issue is due to product failure or external factors.
The decision shall be final and binding.
8.3 ResoluƟon:
Only affected areas will be re-coated if approved. No monetary compensaƟon or full vehicle re-coaƟng is
guaranteed.
9. LIMITATION OF LIABILITY
The liability of Dry Bazaar and Blink Shine is limited strictly to re-applicaƟon of coaƟng where applicable. No
claims for indirect losses, paint damage, or business loss shall be entertained.
10. VOID CONDITIONS
Warranty shall be void if maintenance guidelines are not followed, detailing is skipped, unauthorized
products are used, or coaƟng is tampered with in any manner.
11. TRANSFERABILITY
The warranty is non-transferable and valid only for the original customer and vehicle. Any ownership
transfer voids the warranty.
12. DISPUTE RESOLUTION
All disputes shall first be resolved amicably. If unresolved, the maƩer shall be referred to arbitraƟon under
applicable Indian laws.
13. GOVERNING LAW
This agreement shall be governed by the laws of India, with jurisdicƟon limited to the operaƟng locaƟon of
Dry Bazaar.
14. CUSTOMER DECLARATION
I confirm that I have read and understood all terms and condiƟons, including mandatory maintenance
requirements, and agree to comply fully.
DRY BAZAAR – GRAPHENE COATING
DETAILED TERMS & CONDITIONS
(BLINK SHINE GRAPHENE COATING WARRANTY + APPLICATION + MAINTENANCE POLICY)
This document consƟtutes a legally binding agreement between the Customer, Dry Bazaar (Authorized
Service Provider), and Blink Shine (Product Manufacturer). By accepƟng the invoice and taking delivery of
the vehicle, the customer confirms that they have read, understood, and agreed to all terms, condiƟons,
exclusions, and obligaƟons menƟoned herein.
1. BRAND ROLES & RESPONSIBILITY STRUCTURE
1.1 Blink Shine (Product Manufacturer):
Blink Shine is the manufacturer of the Graphene CoaƟng applied on the vehicle. The brand is responsible
solely for the chemical formulaƟon, durability, and performance characterisƟcs of the coaƟng under normal
usage condiƟons.
1.2 Dry Bazaar (Service Provider):
Dry Bazaar is responsible for surface preparaƟon, coaƟng applicaƟon, and curing process. The service
provider ensures proper installaƟon standards but does not guarantee performance beyond correct
applicaƟon.
1.3 SeparaƟon of Liability:
Any defect arising from coaƟng formulaƟon falls under Blink Shine, while applicaƟon-related issues fall
under Dry Bazaar. External damage, misuse, or environmental factors remain the responsibility of the
customer.
2. WARRANTY COVERAGE – BLINK SHINE GRAPHENE COATING
The warranty applies strictly under normal usage condiƟons and when maintenance guidelines are
followed.
2.1 UV Resistance & Heat DissipaƟon
Graphene coaƟng is designed to provide enhanced resistance against UV rays and reduce surface heat
absorpƟon. Any abnormal coaƟng degradaƟon leading to premature fading or failure will be considered
under warranty.
2.2 OxidaƟon & Environmental ProtecƟon
The coaƟng protects the paint surface against oxidaƟon and environmental degradaƟon. If oxidaƟon occurs
due to coaƟng failure despite proper maintenance, it may be covered under warranty.
2.3 Chemical & Contaminant Resistance
Graphene coaƟng provides resistance against acidic contaminants, bird droppings, and tree sap. However,
contaminants must be removed promptly to avoid permanent etching.
2.4 Hydrophobic & AnƟ-StaƟc ProperƟes
The coaƟng is engineered to provide strong water-repelling (hydrophobic) and anƟ-staƟc properƟes,
reducing dust accumulaƟon. Significant loss of these properƟes due to coaƟng failure may be covered.
2.5 Gloss Enhancement & RetenƟon
Graphene coaƟng enhances paint depth and gloss. NoƟceable reducƟon in gloss levels due to coaƟng
failure under proper maintenance condiƟons may be considered under warranty.
2.6 Reduced Water Spoƫng (Performance Feature)
Graphene coaƟngs are designed to reduce water spoƫng compared to tradiƟonal coaƟngs. However,
complete prevenƟon is not guaranteed, and minor spoƫng is considered normal.
3. WARRANTY EXCLUSIONS
3.1 Physical Damage Exclusions
Scratches, swirl marks, stone chips, dents, or any mechanical damage are not covered. Graphene coaƟng is
not a scratch-proof or impact-resistant layer.
3.2 Improper Washing & Handling
Damage caused by using hard cloths, brushes, or automaƟc car washes is excluded. Improper washing
techniques degrade coaƟng performance over Ɵme.
3.3 Water Spoƫng & Mineral Deposits
Hard water stains and mineral deposits caused by neglect or improper drying are not covered. Regular
maintenance is required to prevent such issues.
3.4 Industrial Fallout & Surface ContaminaƟon
Rail dust, iron parƟcles, cement dust, and industrial pollutants are excluded. These require periodic
decontaminaƟon and are not coaƟng defects.
3.5 Maintenance Negligence
Failure to follow prescribed maintenance schedules or skipping detailing services will void the warranty.
Proper upkeep is essenƟal for coaƟng longevity.
3.6 Unauthorized Products & Layering
ApplicaƟon of wax, sealants, or non-approved chemicals over graphene coaƟng may affect performance
and void warranty coverage.
3.7 Environmental & Natural Events
Floods, hailstorms, fire, or extreme environmental exposure are excluded. Such condiƟons are beyond the
control of the manufacturer.
3.8 Pre-ExisƟng Paint Defects
Any paint defects, scratches, or damages present before coaƟng applicaƟon are not covered. The coaƟng
enhances appearance but does not repair paint.
4. APPLICATION TERMS – DRY BAZAAR
4.1 Surface PreparaƟon:
Proper cleaning, decontaminaƟon, and polishing are performed prior to coaƟng. However, complete
removal of deep scratches or defects depends on paint condiƟon and customer approval.
4.2 ApplicaƟon Nature:
Graphene coaƟng is manually applied and may involve minor high spots, streaks, or reflecƟons if not visible
at delivery. Such concerns must be reported within 24 hours.
4.3 Curing Process:
The coaƟng requires curing Ɵme for opƟmal performance. Exposure to water or contaminants during this
period may affect results and is the customer’s responsibility.
5. PAINT CONDITION DISCLAIMER
5.1 Pre-ExisƟng Paint CondiƟon:
Dry Bazaar does not guarantee the condiƟon of the vehicle’s paint. Any defects present prior to applicaƟon
remain the responsibility of the customer.
5.2 Repainted Panel Risk:
CoaƟng performance on repainted panels may vary due to differences in paint quality. Any failure in such
areas is not covered under warranty.
6. MANDATORY MAINTENANCE POLICY
6.1 Quarterly Detailing Requirement
Customer must undergo exterior detailing service every 3 months from Dry Bazaar or an authorized center
to maintain coaƟng performance and warranty validity.
6.2 Technical JusƟficaƟon
Graphene coaƟngs, despite their advanced properƟes, sƟll accumulate contaminants over Ɵme. Dirt,
minerals, and pollutants reduce hydrophobicity, gloss, and anƟ-staƟc behavior if not regularly removed.
6.3 Warranty Impact
Failure to perform periodic detailing leads to coaƟng degradaƟon and will result in automaƟc voiding of
warranty. Service records must be maintained and presented during claims.
7. CUSTOMER RESPONSIBILITIES
7.1 Post-ApplicaƟon Care:
Avoid washing the vehicle for 5–7 days aŌer coaƟng applicaƟon to allow proper curing.
7.2 Washing Guidelines:
Use only pH-neutral shampoos and microfiber cloths. Avoid automaƟc car washes and harsh cleaning
agents.
7.3 Immediate Contaminant Removal:
Bird droppings, tree sap, and other contaminants must be removed promptly to prevent surface damage.
8. WARRANTY CLAIM PROCESS
8.1 Required DocumentaƟon:
Customer must provide invoice, Blink Shine warranty serial number, and maintenance records for claim
processing.
8.2 InspecƟon:
Vehicle inspecƟon is mandatory to determine whether the issue is due to coaƟng failure or external factors.
Decision shall be final.
8.3 ResoluƟon:
Only affected areas will be re-coated if approved. No monetary compensaƟon or full reapplicaƟon is
guaranteed.
9. LIMITATION OF LIABILITY
Dry Bazaar and Blink Shine are liable only for re-applicaƟon of defecƟve coaƟng. No claims for indirect
losses, paint damage, or vehicle downƟme shall be entertained.
10. VOID CONDITIONS
Warranty becomes void if maintenance guidelines are not followed, detailing is skipped, unauthorized
products are used, or coaƟng is tampered with.
11. TRANSFERABILITY
The warranty is non-transferable and valid only for the original customer and vehicle.
12. DISPUTE RESOLUTION
All disputes shall first be resolved mutually. If unresolved, arbitraƟon shall apply under Indian law.
13. GOVERNING LAW
This agreement shall be governed by the laws of India, with jurisdicƟon limited to the operaƟng locaƟon of
Dry Bazaar.
14. CUSTOMER DECLARATION
I confirm that I have read, understood, and agreed to all terms and condiƟons, including maintenance
requirements and warranty limitaƟons.
DRY BAZAAR – BOROPHENE COATING
DETAILED TERMS & CONDITIONS
(BLINK SHINE BOROPHENE COATING WARRANTY + APPLICATION + MAINTENANCE POLICY)
This document consƟtutes a legally binding agreement between the Customer, Dry Bazaar (Authorized
Service Provider), and Blink Shine (Product Manufacturer). By accepƟng the invoice and taking delivery of
the vehicle, the customer confirms that they have read, understood, and agreed to all terms, condiƟons,
exclusions, and obligaƟons menƟoned herein.
1. BRAND ROLES & RESPONSIBILITY STRUCTURE
1.1 Blink Shine (Product Manufacturer):
Blink Shine is the manufacturer of the Borophene CoaƟng applied on the vehicle. The brand is responsible
for the formulaƟon, chemical performance, and durability of the coaƟng under normal usage condiƟons as
defined in this agreement.
1.2 Dry Bazaar (Service Provider):
Dry Bazaar is responsible for proper surface preparaƟon, applicaƟon, and curing of the borophene coaƟng.
The service provider ensures correct applicaƟon standards but does not guarantee performance beyond
installaƟon quality.
1.3 SeparaƟon of Liability:
Any defect arising from coaƟng material or formulaƟon shall be handled by Blink Shine, while applicaƟonrelated issues fall under Dry Bazaar. External damage, environmental exposure, or misuse shall remain the
sole responsibility of the customer.
2. WARRANTY COVERAGE – BLINK SHINE BOROPHENE COATING
The warranty applies strictly under normal usage condiƟons and subject to adherence to maintenance
requirements.
2.1 Advanced UV ProtecƟon & Thermal Stability
Borophene coaƟng provides enhanced resistance against UV radiaƟon and surface heat buildup. Any
abnormal coaƟng degradaƟon leading to premature fading or failure under proper maintenance may be
considered under warranty.
2.2 OxidaƟon & Paint ProtecƟon
The coaƟng forms a protecƟve barrier that reduces oxidaƟon and paint deterioraƟon. If oxidaƟon occurs
due to coaƟng failure within the warranty period, it may be considered a valid claim upon inspecƟon.
2.3 Chemical & Environmental Resistance
Borophene coaƟng offers improved resistance against acidic contaminants, environmental pollutants, and
chemical exposure. However, prompt removal of contaminants is required to prevent damage.
2.4 Hydrophobic & Ultra-Slick Surface Performance
The coaƟng is designed to provide superior hydrophobic properƟes and slickness, reducing water retenƟon
and dirt adhesion. Significant loss of these properƟes due to coaƟng failure may be considered under
warranty.
2.5 Gloss Enhancement & Long-Term RetenƟon
Borophene coaƟng enhances depth, clarity, and gloss of the paint surface. NoƟceable reducƟon in gloss
below acceptable standards due to coaƟng failure may be evaluated under warranty.
2.6 Reduced ContaminaƟon & AnƟ-Fouling Behavior
The coaƟng is engineered to resist contaminaƟon buildup and reduce bonding of pollutants. However,
complete prevenƟon of contaminaƟon is not guaranteed and depends on maintenance pracƟces.
3. WARRANTY EXCLUSIONS
3.1 Physical Damage Exclusions
Scratches, swirl marks, stone chips, dents, or collision damage are not covered. Borophene coaƟng is not a
scratch-proof or impact-resistant soluƟon.
3.2 Improper Washing & Handling
Damage caused by use of abrasive cloths, brushes, or automaƟc car washes is excluded. Improper washing
techniques significantly reduce coaƟng life and performance.
3.3 Water Spoƫng & Mineral Deposits
Hard water stains and mineral deposits caused by improper drying or neglect are not covered. Regular
maintenance is necessary to prevent such issues.
3.4 Industrial Fallout & Surface ContaminaƟon
Rail dust, iron parƟcles, cement dust, and industrial pollutants are not covered. These contaminants require
periodic decontaminaƟon and are not coaƟng defects.
3.5 Maintenance Negligence
Failure to follow prescribed maintenance schedules, including quarterly detailing, will void the warranty.
Proper upkeep is essenƟal for maintaining coaƟng performance.
3.6 Unauthorized Products & Treatments
ApplicaƟon of wax, sealants, polishing compounds, or non-approved chemicals over borophene coaƟng
may degrade its properƟes and void warranty.
3.7 Environmental & Natural Events
Floods, hailstorms, extreme weather, or natural disasters are excluded. Such events are beyond the control
of Blink Shine and Dry Bazaar.
3.8 Pre-ExisƟng Paint Defects
Any scratches, defects, or paint issues present prior to coaƟng applicaƟon are not covered. CoaƟng
enhances appearance but does not repair damaged paint.
4. APPLICATION TERMS – DRY BAZAAR
4.1 Surface PreparaƟon:
Proper washing, decontaminaƟon, and polishing are carried out prior to applicaƟon. However, complete
defect removal depends on paint condiƟon and customer approval.
4.2 ApplicaƟon Nature:
Borophene coaƟng is applied manually and may result in minor high spots or streaks if not visible at
delivery stage. Such issues must be reported within 24 hours.
4.3 Curing Process:
The coaƟng requires curing Ɵme for opƟmal bonding and performance. Exposure to water or contaminants
during this period may affect results and is the customer’s responsibility.
5. PAINT CONDITION DISCLAIMER
5.1 Pre-ExisƟng Paint CondiƟon:
Dry Bazaar does not guarantee paint condiƟon prior to coaƟng. Any exisƟng defects remain the
responsibility of the customer.
5.2 Repainted Panel Risk:
CoaƟng performance on repainted panels may vary due to paint quality differences. Any failure in such
areas is not covered.
6. MANDATORY MAINTENANCE POLICY
6.1 Quarterly Detailing Requirement
Customer must undergo exterior detailing service every 3 months from Dry Bazaar or an authorized center
to maintain coaƟng performance and warranty validity.
6.2 Technical JusƟficaƟon
Even advanced coaƟngs like borophene accumulate contaminants such as dust, minerals, and pollutants
over Ɵme. Regular detailing removes these deposits, preserving hydrophobicity, gloss, and protecƟve
performance.
6.3 Warranty Impact
Failure to perform scheduled detailing will result in coaƟng degradaƟon and automaƟc voiding of warranty.
Service records must be maintained for verificaƟon.
7. CUSTOMER RESPONSIBILITIES
7.1 Post-ApplicaƟon Care:
Avoid washing the vehicle for 5–7 days aŌer coaƟng applicaƟon to ensure proper curing.
7.2 Washing Guidelines:
Use only pH-neutral shampoos and microfiber cloths. Avoid automaƟc car washes and harsh chemicals.
7.3 Immediate Contaminant Removal:
Bird droppings, tree sap, and similar contaminants must be removed promptly to prevent surface damage.
8. WARRANTY CLAIM PROCESS
8.1 Required DocumentaƟon:
Customer must provide invoice, Blink Shine warranty serial number, and maintenance records for claim
processing.
8.2 InspecƟon:
Vehicle inspecƟon is mandatory to determine the cause of the issue. The decision shall be final and binding.
8.3 ResoluƟon:
Only affected areas will be re-coated if approved. No monetary compensaƟon or full reapplicaƟon is
guaranteed.
9. LIMITATION OF LIABILITY
Dry Bazaar and Blink Shine are liable only for re-applicaƟon of defecƟve coaƟng. No liability for indirect
losses, paint damage, or vehicle downƟme shall be entertained.
10. VOID CONDITIONS
Warranty becomes void if maintenance guidelines are not followed, detailing is skipped, unauthorized
products are used, or coaƟng is tampered with.
11. TRANSFERABILITY
The warranty is non-transferable and valid only for the original customer and vehicle.
12. DISPUTE RESOLUTION
All disputes shall first be resolved mutually. If unresolved, arbitraƟon shall apply under applicable Indian
laws.
13. GOVERNING LAW
This agreement shall be governed by the laws of India, with jurisdicƟon limited to the operaƟng locaƟon of
Dry Bazaar.
14. CUSTOMER DECLARATION
I confirm that I have read, understood, and agreed to all terms and condiƟons, including mandatory
maintenance requirements and warranty limitaƟons.
DRY BAZAAR – GLASS COATING (WINDSHIELD & WINDOWS)
DETAILED TERMS & CONDITIONS
(BLINK SHINE GLASS COATING WARRANTY + APPLICATION + MAINTENANCE POLICY)
This document consƟtutes a legally binding agreement between the Customer, Dry Bazaar (Authorized
Service Provider), and Blink Shine (Product Manufacturer). By accepƟng the invoice and taking delivery of
the vehicle, the customer confirms that they have read, understood, and agreed to all terms, condiƟons,
exclusions, and obligaƟons menƟoned herein.
1. BRAND ROLES & RESPONSIBILITY STRUCTURE
1.1 Blink Shine (Product Manufacturer):
Blink Shine is the manufacturer of the Glass CoaƟng applied on the vehicle’s windshield and glass surfaces.
The brand is responsible for the chemical formulaƟon, hydrophobic performance, and durability of the
coaƟng under normal usage condiƟons.
1.2 Dry Bazaar (Service Provider):
Dry Bazaar is responsible for proper glass surface preparaƟon, coaƟng applicaƟon, and curing. The quality
of performance depends on correct applicaƟon at the Ɵme of service.
1.3 SeparaƟon of Liability:
Product-related defects are covered by Blink Shine, while applicaƟon-related concerns are handled by Dry
Bazaar. External damage, environmental factors, or misuse are the responsibility of the customer.
2. WARRANTY COVERAGE – BLINK SHINE GLASS COATING
Warranty applies only under normal usage condiƟons and proper maintenance.
2.1 Hydrophobic Water Repellency
The coaƟng is designed to repel water effecƟvely, improving visibility during rain. Loss of hydrophobic
performance below acceptable levels during the warranty period may be considered under warranty.
2.2 Improved Driving Visibility
The coaƟng enhances clarity by reducing water adhesion and aiding faster runoff. Any failure in
performance affecƟng visibility due to coaƟng defect may be evaluated under warranty.
2.3 Resistance to Environmental Contaminants
The coaƟng provides resistance against dirt, dust, and minor contaminants. However, regular cleaning is
required to maintain clarity and performance.
2.4 Reduced Water Spoƫng
The coaƟng reduces water spoƫng compared to untreated glass surfaces. However, complete eliminaƟon
of water spots is not guaranteed, especially in hard water condiƟons.
2.5 Ease of Cleaning
The coated surface allows easier removal of dirt and contaminants. Loss of this property due to coaƟng
failure may be considered under warranty if maintenance guidelines are followed.
3. WARRANTY EXCLUSIONS
3.1 Physical Damage to Glass
Cracks, chips, scratches, or breakage of glass are not covered. Glass coaƟng does not strengthen or protect
against physical impact.
3.2 Wiper Blade Damage
Scratches or coaƟng degradaƟon caused by worn-out or damaged wiper blades are excluded. Proper
maintenance of wipers is the responsibility of the customer.
3.3 Improper Cleaning & Handling
Use of harsh chemicals, acid-based cleaners, or abrasive tools can damage the coaƟng. Such damage is not
covered under warranty.
3.4 Water Spoƫng & Mineral Deposits
Hard water stains caused by neglect or improper drying are not covered. Regular cleaning is required to
maintain coaƟng performance.
3.5 Environmental & Chemical Exposure
Damage due to extreme environmental exposure, chemical spills, or industrial pollutants is excluded from
warranty.
3.6 Maintenance Negligence
Failure to follow maintenance guidelines or skipping periodic cleaning services will void warranty eligibility.
3.7 Unauthorized Products
Use of unapproved glass cleaners, polishes, or treatments may degrade the coaƟng and void warranty.
4. APPLICATION TERMS – DRY BAZAAR
4.1 Surface PreparaƟon:
Glass surfaces are cleaned and decontaminated prior to coaƟng. However, exisƟng scratches or marks on
glass will remain visible aŌer coaƟng.
4.2 ApplicaƟon Nature:
Glass coaƟng is applied manually and may result in minor streaks or haze if not properly cured. Any
concerns must be reported within 24 hours.
4.3 Wiper InteracƟon:
IniƟal minor noise or resistance from wipers may occur aŌer coaƟng. This is normal and reduces aŌer
usage.
5. GLASS CONDITION DISCLAIMER
5.1 Pre-ExisƟng Damage:
Dry Bazaar is not responsible for any pre-exisƟng scratches, chips, or defects on glass surfaces.
5.2 Wiper Blade CondiƟon:
Old or damaged wiper blades can reduce coaƟng performance and may cause scratches. Customer must
ensure wipers are in good condiƟon.
6. MANDATORY MAINTENANCE POLICY
6.1 Quarterly Cleaning / Maintenance Requirement
Customer is advised to undergo glass maintenance or cleaning service every 3 months from Dry Bazaar or
an authorized center to maintain coaƟng performance.
6.2 Technical JusƟficaƟon
Glass surfaces accumulate mineral deposits, dust, and contaminants over Ɵme, which reduce hydrophobic
performance. Regular maintenance restores water repellency and ensures clear visibility.
6.3 Warranty Impact
Failure to maintain glass properly may result in reduced performance and void warranty eligibility.
Maintenance records may be required during claim processing.
7. CUSTOMER RESPONSIBILITIES
7.1 Post-ApplicaƟon Care:
Avoid using wipers or washing the vehicle for at least 24–48 hours aŌer coaƟng applicaƟon.
7.2 Cleaning Guidelines:
Use mild glass cleaners and soŌ microfiber cloths. Avoid harsh chemicals and abrasive materials.
7.3 Wiper Maintenance:
Replace worn-out wiper blades regularly to prevent scratches and maintain coaƟng effecƟveness.
8. WARRANTY CLAIM PROCESS
8.1 DocumentaƟon Requirement:
Customer must provide invoice, Blink Shine warranty serial number, and maintenance proof.
8.2 InspecƟon:
Glass surface will be inspected to determine whether the issue is due to coaƟng failure or external factors.
8.3 ResoluƟon:
If approved, the affected glass area will be re-coated. No monetary compensaƟon shall be provided.
9. LIMITATION OF LIABILITY
Dry Bazaar and Blink Shine are liable only for re-applicaƟon of defecƟve coaƟng. No liability for glass
damage, visibility issues due to neglect, or indirect losses shall be entertained.
10. VOID CONDITIONS
Warranty becomes void if maintenance is not followed, unauthorized products are used, or coaƟng is
tampered with.
11. TRANSFERABILITY
Warranty is non-transferable and valid only for the original customer and vehicle.
12. DISPUTE RESOLUTION
All disputes shall first be resolved mutually. If unresolved, arbitraƟon shall apply under Indian law.
13. GOVERNING LAW
This agreement shall be governed by the laws of India, with jurisdicƟon limited to the operaƟng locaƟon of
Dry Bazaar.
14. CUSTOMER DECLARATION
I confirm that I have read and understood all terms and condiƟons and agree to comply with maintenance
requirements.